Toggle down to Overlay and then toggle right and down to Grid. Toggle right again and select On and press SET. Toggle left and press SET to exit. Toggle right to On and press SET. To level the camera, move until a pointer appears at the end of the vertical and horizontal bars. Toggle down to Overlay and then right to select the Toggle All option. The camera will stay on, but the EVF will turn off after a time that you set and will reduce battery usage.
When the proximity sensor is blocked e. Toggle down to Night Glow and right to the options. Quick image Review The Quick Review feature enables you to review a photo immediately after you take it for either 1, 2, or 4 seconds.
Toggle down to Quick Review and right to the options. Note: This feature only works in Photo Mode. Invert Menu This feature allows you to read the menu when the camera is upside down such as when attached to a helmet. Toggle down to Invert Image and toggle right to turn the option on. When EIS is turned on, it will minimize blurring and compensate for shaking of the camera.
Frame Rate The frame rate is the speed at which the camera records video. Toggle down to Frame Rate and right to the Frame Rate options. Press SET again to exit. Set the frame rate from 60 fps to Slo Mo. The Frame Rate will be displayed at the bottom of the Viewfinder.
Note: For best results when using the Day setting on the Scene Ring, select 60 fps. Select 30 fps or slower for Twilight or Night setting. Resolution The camera has two video resolutions: p and p. Toggle down to Resolution and right to choose p or p. Press SET to access the Loop menu. Toggle right on Trigger Mode to select Shutter or Auto. Trigger Mode You can set the Trigger Mode to three different timing options: Before — records 30 seconds before the trigger Middle — records 15 seconds before and 15 seconds after the trigger After — records 30 seconds after the trigger To set the Trigger Mode: Rotate the Settings Dial to Loop Mode.
The Trigger Mode and settings will be visible in the Viewfinder. Toggle right on About to access the menu. Factory Reset Factory Reset returns the camera to its default settings. Toggle right on About and down to Factory Reset. Note: Turn your camera off and on again to complete the Factory Reset. The default setting is Never. Toggle down to the option that best suits your camera use and press SET. Turn the Settings Dial to another Mode to exit the menu.
It is calibrated at the factory, but if you feel that your compass is directionally off you can recalibrate it manually. Toggle down to Calibrate Compass and right to access the animated instructions. Toggle left twice to exit the menu. Toggle left twice to exit the sub-menus. Format You can change the format of the date and time. Toggle down to Date and Time and toggle right to Format. Select the option you want and press SET.
Toggle down to Time Format and toggle right. Toggle down to SD Card and right twice to Format. Toggle to Yes and press SET. Chimes The camera plays chimes for different functions and when you turn the camera on and off. Toggle down to Chimes and right to turn Chimes Off or On. Toggle down to Audio and right to the volume options. Select the volume option you prefer and press SET.
The GPS displays your exact longitude and latitude. Toggle down to On and press SET. Turn the camera to either the Photo, Video, or Loop Mode and go outside to receive a signal. Note: GPS only works outside and requires minutes for the camera to receive an initial location. Toggle down to GPS and right to the menu. Toggle down to Format and right to the Format options.
Toggle left to exit the GPS menu. The GPS coordinates will appear in the upper right side of the Viewfinder. Note: GPS consumes power and should be turned off, when not in use, to extend battery life. Press SET to select. The app is available at the App Store and Google Play. Note: Set your mobile device to Airplane Mode before connecting to Aurora. Reduce the brightness of the Viewfinder. Enable the Auto Power Off feature. Storage and Handling Avoid exposing your camera to very cold or very hot temperatures.
These may shorten battery life. Is your question not listed? Ask a question. About the Aurora DT Aurora DT specifications. Related product manuals. What is an Overflow error? Zeversolar Error Code May 28th, 0 Comments.
Effekta solar inverter data sheet manual and common error codes. August 31st, 0 Comments. Enphase Solar Micro Inverters data sheets manuals. August 31st, 6 Comments.
Read full description. See all 2 pre-owned listings. Sold by majestic All listings for this product Buy it now Buy it now. Pre-owned Pre-owned. About this product Product Identifiers Brand. Additional Product Features Power Source. Show more Show less. Ratings and reviews Write a review.
0コメント